How to Press

👕 How to Press DTF Transfers

Pressing DTF transfers is simple, fast, and beginner-friendly. Follow this step-by-step guide to get vibrant, long-lasting results every time using a heat press or Cricut EasyPress.

🔥 What You’ll Need

Before you start, make sure you have:

✔️ A heat press or Cricut EasyPress
✔️ Your DTF transfer
✔️ Garment (cotton, polyester, or blend)
✔️ Heat-resistant surface
✔️ Parchment paper or Teflon sheet (optional)

⚙️ Recommended Press Settings

These settings work for most garments and DTF transfers:

  • 🌡 Temperature: 310°F / 155°C

  • ⏱ Time: 12–15 seconds

  • 🧲 Pressure: Medium to firm

Tip: Always test on a sample garment first.

🧵 Step-by-Step: How to Press DTF Transfers

1️⃣ Pre-Press the Garment

👕 Press the blank garment for 3–5 seconds to remove moisture and wrinkles.
This helps the transfer bond properly.

2️⃣ Position the Transfer

📍 Place the DTF transfer face up (design visible) on the garment.
Make sure it’s centered and straight.

3️⃣ Heat Press

🔥 Press at 310°F for 12–15 seconds using medium pressure.
Cover with parchment or Teflon if needed.

4️⃣ Peel the Film

🧊 Let the transfer cool for 5–10 seconds, then peel.

  • Most DTF transfers are warm peel

  • Peel slowly and smoothly

If the design lifts, lay it back down and press again for a few seconds.

5️⃣ Final Press (Recommended)

✨ Cover the design with parchment paper and press again for 5–7 seconds.
This improves durability and gives a smooth finish.

🧼 Washing & Care Instructions

To keep your prints looking great:

✔️ Wait 24 hours before washing
✔️ Wash inside out
✔️ Cold water only
✔️ Tumble dry low or hang dry
❌ Do not bleach
❌ Do not iron directly on the design

👕 Compatible Fabrics

DTF transfers work great on:

✅ Cotton
✅ Polyester
✅ Cotton/Poly blends
✅ Light and dark fabrics

Perfect for T-shirts, hoodies, sweatshirts, tote bags, and more.

❗ Common Mistakes to Avoid

🚫 Too little pressure
🚫 Pressing at the wrong temperature
🚫 Peeling too early or too late
🚫 Skipping the final press
🚫 Not pre-pressing the garment

Avoid these to get the best results every time.

💡 Pro Tips for Best Results

⭐ Use firm, even pressure
⭐ Always test new garments
⭐ Store unused transfers in a cool, dry place
⭐ Keep transfers flat and protected

📦 Press Now or Later — Your Choice

DTF transfers can be stored long-term and pressed whenever you’re ready.
No rush, no waste — press only what you need.

✅ Need Help?

If you have any questions about pressing or need support, we’re happy to help.

📞 Contact us anytime through our website
📧 Or email us for pressing assistance

🎯 Final Tip

With the right settings and technique, DTF transfers deliver bold colors, smooth finishes, and long-lasting durability — perfect for beginners and professionals alike.